NumPy

NumPy (pronounced NUM-py) is a library for the Python programming language, adding support for large, multi-dimensional arrays and matrices, along with a large collection of high-level mathematical functions to operate on these arrays. The predecessor of NumPy, Numeric, was originally created by Jim Hugunin with contributions from several other developers. In 2005, Travis Oliphant created NumPy by incorporating features of the competing Numarray into Numeric, with extensive modifications. NumPy is open-source software and has many contributors. NumPy is fiscally sponsored by NumFOCUS. == History == === matrix-sig === The Python programming language was not originally designed for numerical computing, but attracted the attention of the scientific and engineering community early on. In 1995 the special interest group (SIG) matrix-sig was founded with the aim of defining an array computing package; among its members was Python designer and maintainer Guido van Rossum, who extended Python's syntax (in particular the indexing syntax) to make array computing easier. === Numeric === An implementation of a matrix package was completed by Jim Fulton, then expanded to support multi-dimensional arrays by Jim Hugunin and called Numeric (also variously known as the "Numerical Python extensions" or "NumPy"), with influences from the APL family of languages, Basis, MATLAB, FORTRAN, S and S+, and others. Hugunin, a graduate student at the Massachusetts Institute of Technology (MIT), joined the Corporation for National Research Initiatives (CNRI) in 1997 to work on JPython, leaving Paul Dubois of Lawrence Livermore National Laboratory (LLNL) to take over as maintainer. Other early contributors include David Ascher, Konrad Hinsen and Travis Oliphant. === Numarray === A new package called Numarray was written as a more flexible replacement for Numeric. Like Numeric, it too is now deprecated. Numarray had faster operations for large arrays, but was slower than Numeric on small ones, so for a time both packages were used in parallel for different use cases. The last version of Numeric (v24.2) was released on 11 November 2005, while the last version of numarray (v1.5.2) was released on 24 August 2006. There was a desire to get Numeric into the Python standard library, but Guido van Rossum decided that the code was not maintainable in its state then. === NumPy === In early 2005, NumPy developer Travis Oliphant wanted to unify the community around a single array package and ported Numarray's features to Numeric, releasing the result as NumPy 1.0 in 2006. This new project was part of SciPy. To avoid installing the large SciPy package just to get an array object, this new package was separated and called NumPy. Support for Python 3 was added in 2011 with NumPy version 1.5.0. In 2011, PyPy started development on an implementation of the NumPy API for PyPy. As of 2023, it is not yet fully compatible with NumPy. == Features == NumPy targets the CPython reference implementation of Python, which is a non-optimizing bytecode interpreter. Mathematical algorithms written for this version of Python often run much slower than compiled equivalents due to the absence of compiler optimization. NumPy addresses the slowness problem partly by providing multidimensional arrays and functions and operators that operate efficiently on arrays; using these requires rewriting some code, mostly inner loops, using NumPy. Using NumPy in Python gives functionality comparable to MATLAB since they are both interpreted, and they both allow the user to write fast programs as long as most operations work on arrays or matrices instead of scalars. In comparison, MATLAB boasts a large number of additional toolboxes, notably Simulink, whereas NumPy is intrinsically integrated with Python, a more modern and complete programming language. Moreover, complementary Python packages are available; SciPy is a library that adds more MATLAB-like functionality and Matplotlib is a plotting package that provides MATLAB-like plotting functionality. Although MATLAB can perform sparse matrix operations, NumPy alone cannot perform such operations and requires the use of the scipy.sparse library. Internally, both MATLAB and NumPy rely on BLAS and LAPACK for efficient linear algebra computations. Python bindings of the widely used computer vision library OpenCV utilize NumPy arrays to store and operate on data. Since images with multiple channels are simply represented as three-dimensional arrays, indexing, slicing or masking with other arrays are very efficient ways to access specific pixels of an image. The NumPy array as universal data structure in OpenCV for images, extracted feature points, filter kernels and many more vastly simplifies the programming workflow and debugging. Importantly, many NumPy operations release the global interpreter lock, which allows for multithreaded processing. NumPy also provides a C API, which allows Python code to interoperate with external libraries written in low-level languages. === The ndarray data structure === The core functionality of NumPy is its "ndarray", for n-dimensional array, data structure. These arrays are strided views on memory. In contrast to Python's built-in list data structure, these arrays are homogeneously typed: all elements of a single array must be of the same type. Such arrays can also be views into memory buffers allocated by C/C++, Python, and Fortran extensions to the CPython interpreter without the need to copy data around, giving a degree of compatibility with existing numerical libraries. This functionality is exploited by the SciPy package, which wraps a number of such libraries (notably BLAS and LAPACK). NumPy has built-in support for memory-mapped ndarrays. === Limitations === Inserting or appending entries to an array is not as trivially possible as it is with Python's lists. The np.pad(...) routine to extend arrays actually creates new arrays of the desired shape and padding values, copies the given array into the new one and returns it. NumPy's np.concatenate([a1,a2]) operation does not actually link the two arrays but returns a new one, filled with the entries from both given arrays in sequence. Reshaping the dimensionality of an array with np.reshape(...) is only possible as long as the number of elements in the array does not change. These circumstances originate from the fact that NumPy's arrays must be views on contiguous memory buffers. Algorithms that are not expressible as a vectorized operation will typically run slowly because they must be implemented in "pure Python", while vectorization may increase memory complexity of some operations from constant to linear, because temporary arrays must be created that are as large as the inputs. Runtime compilation of numerical code has been implemented by several groups to avoid these problems; open source solutions that interoperate with NumPy include numexpr and Numba. Cython and Pythran are static-compiling alternatives to these. Many modern large-scale scientific computing applications have requirements that exceed the capabilities of the NumPy arrays. For example, NumPy arrays are usually loaded into a computer's memory, which might have insufficient capacity for the analysis of large datasets. Further, NumPy operations are executed on a single CPU. However, many linear algebra operations can be accelerated by executing them on clusters of CPUs or of specialized hardware, such as GPUs and TPUs, which many deep learning applications rely on. As a result, several alternative array implementations have arisen in the scientific python ecosystem over the recent years, such as Dask for distributed arrays and TensorFlow or JAX for computations on GPUs. Because of its popularity, these often implement a subset of NumPy's API or mimic it, so that users can change their array implementation with minimal changes to their code required. A library named CuPy, accelerated by Nvidia's CUDA framework, has also shown potential for faster computing, being a 'drop-in replacement' of NumPy. == Examples == NumPy is conventionally imported as np. === Basic operations === === Universal functions === === Linear algebra === === Multidimensional arrays === === Incorporation with OpenCV === === Nearest-neighbor search === Functional Python and vectorized NumPy version. === F2PY === Quickly wrap native code for faster scripts.

Gas (app)

Gas (sometimes stylized in all caps), formerly known as Melt as well as Crush, was an American anonymous social media app. Launched in August 2022, the app is oriented towards high schoolers. The app was developed by Nikita Bier, Isaiah Turner, and former Facebook engineer Dave Schatz. Gas was largely based upon the prior tbh app developed by co-founder Nikita Bier, along with Erik Hazzard, Kyle Zaragoza, and Nicolas Ducdodon in September 2017. tbh was acquired by Facebook inc. (now Meta Platforms) on October 16, 2017, and nearly a year later in July 2018 was dissolved, owing to low usage. Gas follows a similar purpose to tbh in being a social media app oriented towards high schoolers. In the app, users participate in anonymous polls regarding pre-written complimentary statements to their peers, such as "I'd say yes if (blank) asked me out on a date," "I think (blank) is the coolest kid in school," or "would make an ugly face and still look pretty." Winners of said polls receive a "flame." The name of the app is derived from this, with "gassing someone up" being Gen Z slang for complimenting someone. Users can pay a $6.99 subscription that enables "God Mode," which shows hints regarding who voted for them in a poll. Gas overtook TikTok and BeReal as the most downloaded app on the Apple App Store in October 2022 (the app is currently not available for Android). The app has over 5.1 million downloads as of early November 2022, over a million active users and 300 thousand daily downloads as of October 2022. Currently, the app is available in Canada and the majority of the United States. On January 17, 2023, Gas was acquired by Discord, however it would remain a standalone app and its developers became Discord staff members. On October 18, 2023, Discord announced that service for Gas would be permanently ending effective November 7, 2023, due to a steep decline in users. Effective November 7, the app became completely unusable. == Controversy regarding human-trafficking == Beginning in October 2022, rumors spread largely throughout TikTok and Snapchat alleged that the app was linked to human trafficking (in particular sex trafficking). According to Bier, the rumor originated with a single user review from China on October 5, and then was disseminated through TikTok accounts with "few to no US teen followers." Although largely dismissed as a hoax by experts, who cite how the app doesn't log user locations and general anonymity, the hoax became pervasive to the extent that various police departments, school systems, and local news outlets began issuing warnings regarding the app. For instance, on October 31, 2022, the police department of Piedmont, Oklahoma issued a warning to parents, encouraging them to check their children's phones, while on November 3, the Oklahoma Oktaha Public School system stated in a Facebook post that "Children are being kidnapped in other towns and this new app is thought to be the source of predators finding their location." (both statements have since been retracted by Police Chief Scott Singer and Superintendent Jerry Needham respectively). Additionally, local medial outlets such as KOCO in Oklahoma City ran stories making similar statements. The rumor had a negative impact on the app, with downloads plateauing for a two-week period in late October and with 3% of users in a single day reportedly uninstalling the app. Revenue and ratings have also reportedly dropped and the company's social media accounts have been bombarded with comments labeling them as sex-traffickers. Additionally, the four-person development team has reportedly been bombarded with various death threats as a result.

Gas (app)

Framebuffer

A framebuffer (frame buffer, or sometimes framestore) is a portion of random-access memory (RAM) containing a bitmap that drives a video display. It is a memory buffer containing data representing all the pixels in a complete video frame. Modern video cards contain framebuffer circuitry in their cores. This circuitry converts an in-memory bitmap into a video signal that can be displayed on a computer monitor. In computing, a screen buffer is a part of computer memory used by a computer application for the representation of the content to be shown on the computer display. The screen buffer may also be called the video buffer, the regeneration buffer, or regen buffer for short. The phrase "screen buffer” refers to a logical function, while video memory refers to a hardware storage location. In particular, the screen buffer may be placed in the main RAM, the video memory, or some other hardware location. To reduce latency and avoid screen tearing, multiple frames can be buffered, and this technique is called multiple buffering. When this is so, at any time, only one frame would be visible, and the others would not be. The currently invisible frames are located in the off-screen buffer. The information in the buffer typically consists of color values for every pixel to be shown on the display. Color values are commonly stored in 1-bit binary (monochrome), 4-bit palettized, 8-bit palettized, 16-bit high color and 24-bit true color formats. An additional alpha channel is sometimes used to retain information about pixel transparency. The total amount of memory required for the framebuffer depends on the resolution of the output signal, and on the color depth or palette size. == History == Computer researchers had long discussed the theoretical advantages of a framebuffer but were unable to produce a machine with sufficient memory at an economically practicable cost. In 1947, the Manchester Baby computer used a Williams tube, later the Williams-Kilburn tube, to store 1024 bits on a cathode-ray tube (CRT) memory and displayed on a second CRT. Other research labs were exploring these techniques with MIT Lincoln Laboratory achieving a 4096 display in 1950. A color-scanned display was implemented in the late 1960s, called the Brookhaven RAster Display (BRAD), which used a drum memory and a television monitor. In 1969, A. Michael Noll of Bell Telephone Laboratories, Inc. implemented a scanned display with a frame buffer, using magnetic-core memory. A year or so later, the Bell Labs system was expanded to display an image with a color depth of three bits on a standard color TV monitor. The vector graphics used in the computer had to be converted for the scanned graphics of a TV display. In the early 1970s, the development of MOS memory (metal–oxide–semiconductor memory) integrated-circuit chips, particularly high-density DRAM (dynamic random-access memory) chips with at least 1 kb memory, made it practical to create, for the first time, a digital memory system with framebuffers capable of holding a standard video image. This led to the development of the SuperPaint system by Richard Shoup at Xerox PARC in 1972. Shoup was able to use the SuperPaint framebuffer to create an early digital video-capture system. By synchronizing the output signal to the input signal, Shoup was able to overwrite each pixel of data as it shifted in. Shoup also experimented with modifying the output signal using color tables. These color tables allowed the SuperPaint system to produce a wide variety of colors outside the range of the limited 8-bit data it contained. This scheme would later become commonplace in computer framebuffers. In 1974, Evans & Sutherland released the first commercial framebuffer, the Picture System, costing about $15,000. It was capable of producing resolutions of up to 512 by 512 pixels in 8-bit grayscale, and became a boon for graphics researchers who did not have the resources to build their own framebuffer. The New York Institute of Technology would later create the first 24-bit color system using three of the Evans & Sutherland framebuffers. Each framebuffer was connected to an RGB color output (one for red, one for green and one for blue), with a Digital Equipment Corporation PDP 11/04 minicomputer controlling the three devices as one. In 1975, the UK company Quantel produced the first commercial full-color broadcast framebuffer, the Quantel DFS 3000. It was first used in TV coverage of the 1976 Montreal Olympics to generate a picture-in-picture inset of the Olympic flaming torch while the rest of the picture featured the runner entering the stadium. The rapid improvement of integrated-circuit technology made it possible for many of the home computers of the late 1970s to contain low-color-depth framebuffers. Today, nearly all computers with graphical capabilities utilize a framebuffer for generating the video signal. Amiga computers, created in the 1980s, featured special design attention to graphics performance and included a unique Hold-And-Modify framebuffer capable of displaying 4096 colors. Framebuffers also became popular in high-end workstations and arcade system boards throughout the 1980s. SGI, Sun Microsystems, HP, DEC and IBM all released framebuffers for their workstation computers in this period. These framebuffers were usually of a much higher quality than could be found in most home computers, and were regularly used in television, printing, computer modeling and 3D graphics. Framebuffers were also used by Sega for its high-end arcade boards, which were also of a higher quality than on home computers. == Display modes == Framebuffers used in personal and home computing often had sets of defined modes under which the framebuffer can operate. These modes reconfigure the hardware to output different resolutions, color depths, memory layouts and refresh rate timings. In the world of Unix machines and operating systems, such conveniences were usually eschewed in favor of directly manipulating the hardware settings. This manipulation was far more flexible in that any resolution, color depth and refresh rate was attainable – limited only by the memory available to the framebuffer. An unfortunate side-effect of this method was that the display device could be driven beyond its capabilities. In some cases, this resulted in hardware damage to the display. More commonly, it simply produced garbled and unusable output. Modern CRT monitors fix this problem through the introduction of protection circuitry. When the display mode is changed, the monitor attempts to obtain a signal lock on the new refresh frequency. If the monitor is unable to obtain a signal lock or if the signal is outside the range of its design limitations, the monitor will ignore the framebuffer signal and possibly present the user with an error message. LCD monitors tend to contain similar protection circuitry, but for different reasons. Since the LCD must digitally sample the display signal (thereby emulating an electron beam), any signal that is out of range cannot be physically displayed on the monitor. == Color palette == Framebuffers have traditionally supported a wide variety of color modes. Due to the expense of memory, most early framebuffers used 1-bit (2 colors per pixel), 2-bit (4 colors), 4-bit (16 colors) or 8-bit (256 colors) color depths. The problem with such small color depths is that a full range of colors cannot be produced. The solution to this problem was indexed color, which adds a lookup table to the framebuffer. Each color stored in framebuffer memory acts as a color index. The lookup table serves as a palette with a limited number of different colors, while the rest is used as an index table. Here is a typical indexed 256-color image and its own palette (shown as a rectangle of swatches): In some designs, it was also possible to write data to the lookup table (or switch between existing palettes) on the fly, allowing dividing the picture into horizontal bars with their own palette and thus rendering an image that had a far wider palette. For example, viewing an outdoor shot photograph, the picture could be divided into four bars: the top one with emphasis on sky tones, the next with foliage tones, the next with skin and clothing tones, and the bottom one with ground colors. This required each palette to have overlapping colors, but, carefully done, allowed great flexibility. == Memory access == While framebuffers are commonly accessed via a memory mapping directly to the CPU memory space, this is not the only method by which they may be accessed. Framebuffers have varied widely in the methods used to access memory. Some of the most common are: Mapping the entire framebuffer to a given memory range. Port commands to set each pixel, range of pixels or palette entry. Mapping a memory range smaller than the framebuffer memory, then bank switching as necessary. The framebuffer organization may be packed pixel or planar. The framebuffer may be all

Gas (app)

Gas (app)

Gas (app)

Gas (app)

Framebuffer

Gas (app)

Related Articles